spridgets
[Top] [All Lists]

[Spridgets] Windshield seal

Subject: [Spridgets] Windshield seal
From: thistle_3619 at yahoo.com (James Gruber)
Date: Mon, 9 May 2011 21:59:54 -0700 (PDT)
Jess,

Real easy if you take off the side piece. 3-4 Screws hold it on and in
my case 
came apart real easy. A little dishwasher soap and seals slide right
in. BTW 
those are not Phillips Screws in there but PosiDrive Screws. Don't
try a 
Phillips or you will strip out. You can find a PosiDrive Bit in one of
those 100 
different screwdriver bit assortments kits. I found one for $14.95
at local ACE 
Hardware.

Reinstall tip, I cut a slot in the shims that go
between the body and the 
windshield posts. You can get the bolts started that
way and simply slip the 
shims in before tightening down.

<Prev in Thread] Current Thread [Next in Thread>