spridgets
[Top] [All Lists]

[Spridgets] fastening fasteners

Subject: [Spridgets] fastening fasteners
From: bmwwxman at gmail.com (Jim Johnson)
Date: Thu, 23 Jun 2011 13:24:32 -0500
References: <F12EBA124C6E064B9CF1B45E67DDB7E7C8DB34B1@dlee02.ent.ti.com>
I only recently started using Loctite and am still learning about it.
However, prior to Loctite and for really critical applications I would often
drill the bolt and nut and safety wire it. I learned about safety wiring in
the Air Force....

Cheers!!
Jim

On Thu, Jun 23, 2011 at 12:04 PM, Fisher, Ed <edwd at ti.com> wrote:

> Many moons ago I built equipment that hung under the wings of FA-18
> fighting
> hornets.  We mechanically shocked, vibrated, and accelerated the bejeebers
> out
> of that gear, per military specifications and contract.  After all, in high
> G
> maneuvers and repeated slammings on the aircraft carrier decks, they were
> seeing real-life conditions that mimicked whatever we could throw at them
> and
> the Navy didn't want them coming apart, nor did I.  We used Loctite,
> however
> our hardware not only had to be clean it had to be primered with a special
> Loctite promoter.  We used different colors for different applications, and
> actually referred to Loctite green as 'liquid weld'.  It didn't come apart
> without heat.  The Loctite choice was relatively inexpensive and very
> effective.  Anyways, it took a little diligence and called for a meticulous
> nature, but I'm sure that doesn't dissuade anyone here!  I still employ
> what I
> learned then when working on equipment at home, especially my motorcycle.
> :)
>
> Ed Fisher
> Dallas, Tx
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/bmwwxman at gmail.com
>
>


-- 
Cheers!!
Jim Johnson
Don't miss the BIG PARTY!!  Midget 50th Anniversary!
Elkhart Lake, WI  July 18-22, 2011
Info & Registration here:
http://www.sprite-midgetclub.org

<Prev in Thread] Current Thread [Next in Thread>