I made my own, but later found they are available off the shelf, you can
google "Leaf spring wedges". Here is a good reply to your question from the
Spritespot;
http://www.spritespot.com/phpBB3/viewtopic.php?f=38&t=4537
BTW, you don't really need a full wedge. Cut some pieces of strip stock (1/2"
wide) and drill 13/32" holes on 2-3/8" centerlines and place under the spring.
Eliminate the U-Bolt, which probably won't be long enough anyway, and use a
heavy bar across the top of the spring with grade 8 bolts.
John
Fogelsville, PA
--- On Tue, 7/5/11, Gordon Gilomen <ggilomen@gmail.com> wrote:
From: Gordon Gilomen <ggilomen@gmail.com>
Subject: [Spridgets] Bugeye rear spring wedges
To: "Spridgeteers" <spridgets@autox.team.net>
Date: Tuesday, July 5, 2011, 7:43 PM
I am looking for a pair of bugeye rear spring lowering wedges.
Winners Circle no longer has them. Any of you have a pair you can let
go of.
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/fastvee@yahoo.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|