Mike,
You may be on the right track. Worked on a Messerschmidt Bf 109 several
years ago and she blew an oil line on run up. Seems an in-house made
gasket was put in upside down and actually covered the passage way. Oops.
We had a lot of oil to clean up. Nope, I didn't install the gasket! We
did use 2 bags of oil-dry though.
No help, just an anecdote.
Good luck.
Dave W.
> I have a serious oil overpressure problem with the 1275 in my Bugeye. An
> adjustable oil relief valve from APT did not help, even when adjusted all
> the
> way out. David Anton suspects the oil gallery relief hole is plugged or
> was
> inadvertantly sealed by mistake along with the othe other galleries that
> are
> supposed to be sealed when the short block was rebuilt a few years ago. I
> will be pulling this engine in the next few weeks to try to determine just
> exactly where the overpressure is coming from. Does anyone know exactly
> where
> I should look to determine which hole is the relief gallery hole in the
> area
> of the oil pan under the engine?
>
> Mike MacLean
> 60 Sprite
> 56 BN2
> 02 Heritage Springer
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/dwoerpel@wi.net
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|