Think "relative to the torque wrench" rather than to the horizon.
David L
On Jul 29, 2011, at 17:10, Rick Fisk <refisk@chartermi.net> wrote:
> David,
>
> The "due care must be exercised to avoid affecting the accuracy" part I agree
> with 100%. It was the "horizontal or perpendicular" thing that had me
> confused. :-)
>
> Rick
>
> Sent from my iPad
>
> On Jul 29, 2011, at 4:26 PM, David Lieb <72spridget@gmail.com> wrote:
>
>> Rick,
>> The issue was an extension between the torque wrench and the socket.
>> Due care must be exercised to avoid affecting the accuracy of your
>> torque readings.
>> David L
>>
>> On Jul 29, 2011, at 16:09, Rick Fisk <refisk@chartermi.net> wrote:
>>
>>> "you have to keep things horizontal or perpendicular to get an accurate
> Torque
>>> Wrench reading" Huh??? You guys must have taken a different physics
> class
>>> than I did. :-)
>>>
>>> Rick
>>>
>>> Sent from my iPad
>>>
>>> On Jul 29, 2011, at 8:25 AM, David Lieb <72spridget@gmail.com> wrote:
>>>
>>>>> No. It just complicates things as you have to keep things horizontal or
>>>>
>>>> perpendicular to get an accurate Torque Wrench reading. ...bill in
>>> corvallis
>>>>
>>>> Very well put! I couldn't figure out how to phrase it.
>>>> David L
>>> _______________________________________________
>>>
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/72spridget@gmail.com
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/72spridget@gmail.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|