[Spridgets] WAS: Hardening Steel

Subject:	[Spridgets] WAS: Hardening Steel
From:	bjshov8 at tx.rr.com (bjshov8 at tx.rr.com)
Date:	Wed, 17 Aug 2011 20:52:52 +0000

Lets take one of those axles down to 4K and then try to drill holes in the 
flange!

And depending on the outcome of that one, take it down about another 10 degrees 
and try it again.



> So we could put Peter in his Mini and take it to 4K

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Spridgets] WAS: Hardening Steel, Mark Haynes [Spridgets] WAS: Hardening Steel, Mark Haynes Re: [Spridgets] WAS: Hardening Steel, Peter Caldwell [Spridgets] WAS: Hardening Steel, Peter Caldwell Re: [Spridgets] WAS: Hardening Steel, bjshov8 [Spridgets] WAS: Hardening Steel, bjshov8 at tx.rr.com <= Re: [Spridgets] WAS: Hardening Steel, corvallis [Spridgets] WAS: Hardening Steel, corvallis at peoplepc.com Re: [Spridgets] WAS: Hardening Steel, Kitterer Bob [Spridgets] WAS: Hardening Steel, Kitterer Bob [Spridgets] WAS: Hardening Steel, Mark Haynes [Spridgets] WAS: Hardening Steel, Jim Johnson [Spridgets] WAS: Hardening Steel, dwramsey at att.net [Spridgets] WAS: Hardening Steel, Mark Haynes

Previous by Date:	Re: [Spridgets] WAS: Hardening Steel, bjshov8
Next by Date:	Re: [Spridgets] WAS: Hardening Steel, corvallis
Previous by Thread:	Re: [Spridgets] WAS: Hardening Steel, bjshov8
Next by Thread:	Re: [Spridgets] WAS: Hardening Steel, corvallis
Indexes:	[Date] [Thread] [Top] [All Lists]