spridgets
[Top] [All Lists]

[Spridgets] Carburetors - lifting pin

Subject: [Spridgets] Carburetors - lifting pin
From: billmasq at hotmail.com (Bill Masquelier)
Date: Tue, 30 Aug 2011 15:18:40 -0700
References: <CAGe=UP5r6E8G4+mF_b=Rq_8kw2qEaMRhnekqxTTNAnsfpmzsXA@mail.gmail.com>
If you lift the pin as far as you can it lifts the piston the proper amount-
you don't need to measure anything, just push it up and it stops where you
need it to.
BillM

> Date: Tue, 30 Aug 2011 16:15:59 -0400
> From: heard at datatrontech.net
> To: spridgets at autox.team.net
> Subject: [Spridgets] Carburetors - lifting pin
>
> How do you lift this thing .031"?  It feels like there is about 3/16"
before
> you feel any resistance, then it might move another 1/8" or so.  I'm just
> not sure how I'm supposed to move this thing I cannot see 1/32" with my fat
> fingers and I'm not sure where to start my guess.
>
> I'm trying to get ready for my first drive now that I finally have my seats
> back.  Been making door panels and putting in carpet.  Video to come....
>
> Thanks,
> Heard
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/billmasq at hotmail.com

<Prev in Thread] Current Thread [Next in Thread>