spridgets
[Top] [All Lists]

Re: [Spridgets] Column Surround

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] Column Surround
From: <corvallis@peoplepc.com>
Date: Sat, 1 Oct 2011 09:06:09 -0700
Yes, you do have to drop the column to get the shroud off.
 ...bill in corvallis
====================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Macy Larry
Sent: Saturday, October 01, 2011 6:21 AM
To: James Gruber
Cc: Spridgets Digest
Subject: Re: [Spridgets] Column Surround

Jim,

Just drop the column. It is only 4 bolts and gives all the clearance you
need. I do not think you can get the shroud off, even if you get the screws
out.

Larry

On Sep 30, 2011, at 6:53 PM, James Gruber wrote:

> OK Standard Slotted Screws in there but what special tool is needed to get
out those back screws. Looks like the a screwdriver on the ned of a flex
shaft is needed to remove without dropping the column.
> _______________________________________________
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/lmacy@mac.com
> 

-- 

Larry B. Macy, Ph.D.
macy@upenn.edu
Senior IT Program Director
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 1015 Gates
Philadelphia, PA 19104


"I think the problem, to be quite honest with you, is that you've never
actually known what the question is." - Douglas Adams
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/corvallis@peoplepc.com
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>