spridgets
[Top] [All Lists]

[Spridgets] Bugeye / Midget conversion parts

Subject: [Spridgets] Bugeye / Midget conversion parts
From: mgmaven at bellsouth.net (Bob Spruck)
Date: Mon, 02 Jan 2012 18:14:05 -0500
Despite the accumulated and valuable knowledge of the Listers, when in 
doubt, I would call someone like David Anton at APT in California at 
(800) 278-3278 www.aptfast.com or Dave, or Rob Giorgi at Winner's Circle 
in Ohio at (216) 221-4666 and www.spridget.com, or Peter Caldwell at 
World Wide Auto Parts in Wisconsin at (800) 362-1025 and www.nosimport.com.

These guys all have vast experience in normal and unusual Spridget 
applications, and in my experience with each, will give you information 
and advice in the hopes of buying your solution from them.

Also keep in mind that most lowering is done by the spring pan bolts. 
Springs of different ratings will change the handling characteristics 
more than the right spring with the lowering kit. I have 685 in/lb 
spring on my '67 vintage racer and I can sure feel the difference 
between them and the stock springs on my '72. They are fine on the 
track, but I wouldn't want them on a street car! So, choose carefully!

Bob Spruck

<Prev in Thread] Current Thread [Next in Thread>