spridgets
[Top] [All Lists]

[Spridgets] Cam nut torque spec

Subject: [Spridgets] Cam nut torque spec
From: homehandy at sbcglobal.net (Jeff Kelly)
Date: Wed, 2 May 2012 16:29:57 -0500
References: <CAM6-Rjf0roOUvKTTLNZsYrBDyS_F1ARxBxdzN+x-Bb1Tt3VAPg@mail.gmail.com>
I was In the same predicament last week.  None of my manuals give a setting 
for the cam nut.  We tightened it down good using Red Lock Tight. But if you 
have a good Tab Washer (the tab fits into the keyway on the cam shaft) and 
bend it over the nut so the nut can not move, lock tight is not needed.

Jeff Kelly

-----Original Message----- 
From: Hal Faulkner
Sent: Wednesday, May 02, 2012 11:24 AM
To: Spridgets
Subject: [Spridgets] Cam nut torque spec

Can't seem to find a torque spec for the camshaft nut.  Anyone out there
got that info readily available?
Thanks,
Hal
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/homehandy at sbcglobal.net 

<Prev in Thread] Current Thread [Next in Thread>