Nothing hidden you haven't already mentioned. Be sure to have some steel
plates underneath each mounting point so the bolts are pulling on a broader
area. Bill in Oregon
================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Mark Haynes
Sent: Wednesday, November 07, 2012 7:41 AM
To: spridgets@autox.team.net
Subject: [Spridgets] Rollbar installation
I found a really nice rollbar for the MKII, with cross braces and all, it's
set up to mount just inside of the radius of the rear wheel wells behind the
seats (on top of the frame box). I've never been into the frame area here,
is there anything that I need to be aware of (aside from putting a hole
through the fuel line), like double walls, strange supports that interfere
with access, etc?
It's winter, time to tear it down, fix the trans, install the rollbar, find
out what I did to the speedo drive or cable, and reinstall everything-no
biggie !?
Mark Haynes
It only goes one way-Pay it Forward
HAN6L12977
AN5L8016
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.netzero.net/TGL3231/509a830267e893027a38st02duc
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/spridgets/corvallis@peoplepc.com
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|