Lester,still tending to the block having some old dirt of material in it.
Take bottom hose and use your house water hose to force water through the
system with the thermostat out. Keep the water hose ticht with rags to
force the water through. See how much gunk comes out. Will give you an
idea of what you are dealing with in the block.
Randy
----- Original Message -----
From: "Lester" <oldsaabguy@comcast.net>
To: "Spridgets list" <spridgets@autox.team.net>
Sent: Friday, September 26, 2014 4:25 PM
Subject: Re: [Spridgets] Water temp question..
> My plan exactly..
>
> Lester
>
>
> On Sep 26, 2014, at 12:53 PM, bmwwxman . wrote:
>
>> Lester,
>>
>> While you have the rad out take it to your local radiator shop and have
>> them
> pressure test it. Might as well eliminate for once and for all the chance
> of
> a pin hole pressure leak.
>>
>> Cheers!!
>> Jim
>>
>> On Fri, Sep 26, 2014 at 12:42 PM, Lester <oldsaabguy@comcast.net> wrote:
>> Just to update everyone..
>>
>> Pulled radiator and there seems to be ample flow judging by how quickly
>> it
>> emptied.
>>
>> Pulled water pump, impeller connected to shaft.
>>
>> Going to re-assemble and attach an electric pusher fan just to see if
>> that
>> helps.
>>
>> Going to retry the combustion test and pull out the pressure tester as
> well.
>>
>> Not going to drive it tho'...
>>
>> Lester
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/r.alkins001@comcast.net
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|