Re: [Spridgets] Timing marks don't align

[Jon Paschke via Spridgets <spridgets@autox.team.net>]

Got it fixed, operator error...

Thanks all!


On 8/26/2016 1:55 PM, Jon Paschke via Spridgets wrote:
> Hi
> I've just rebuilt my 1275 and it started right up and we broke in the 
> cam with no problems. After shutting it down and it cooled off we put 
> the timing light on it and the marks are at least 2 inches apart and 
> when I try moving the distributor to get them close the motor will not 
> run. What did I do? it seems like it's about a quarter of the bottom 
> pulley off. I have the distributor aligned according to the book and 
> the rotor points right at number one at TDC. I have a pertronics in it 
> and it ran fine and timed right before the rebuild. Could the cam be off?
> Thanks in advance,
> Jon
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/jpaschke@bak.rr.com
>

------------------------

spridgets@autox.team.net


Archive: http://www.team.net/archive