spridgets
[Top] [All Lists]

Re: [Spridgets] Trailer question

To: Lester Ewing <oldsaabguy@comcast.net> wZGNjnx4JImJ1WD7pME9pcT0Wzc9lMNI1MRDw1BpfTrx2rjEQmEhX0pp4+6hgR9z+QI4Yg8s9DC4/N6ydhldPxQXEb76PN3szhU=
Subject: Re: [Spridgets] Trailer question
From: Rick Fisk via Spridgets <spridgets@autox.team.net>
Date: Sun, 19 Apr 2020 10:52:29 -0400
Authentication-results: chartermi.net; none a=r1s4udVvJQAa4S1PDOZ50w==:117 a=r1s4udVvJQAa4S1PDOZ50w==:17 a=IkcTkHD0fZMA:10 a=zOoktvdPAAAA:8 a=eQceq3sx8yXFFOAmAsAA:9 a=QEXdDO2ut3YA:10 a=GGGinmgZRQXmVEG1E52S:22
Cc: Spridgets via Spridgets <spridgets@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: spridgets@autox.team.net
References: <16DD1754-8A45-4032-B30E-DA57A0DADA42@comcast.net>
Hard to answer that question Lester.  The axle itself could be the limiting 
factor, it could be the axle bearings, could even be the tires.  If the trailer 
has brakes they could be the limiting factor.  Could also be the structure of 
the trailer.  All of these things have to be considered.  So my is is I dunno.

Rick

Sent from my keyboard

> On Apr 19, 2020, at 10:38 AM, Lester Ewing via Spridgets 
> <spridgets@autox.team.net> wrote:
> 
>     
> Good Morning,
> 
> I have a technical question about trailer axles and ratings.  I am trying to 
> decide if I can just put heavier duty springs on the axles I have to increase 
> the weight carrying capacity.  
> 
> The axles are on the high side of the lower weight range and are thus larger 
> in diameter.  The manufacturer is no longer in the business of personal 
> trailer axles.  The new place wants me to give them data from  a data plate 
> which these axles do not have.
> 
> Any thoughts?
> 
> TIA
> 
> Lester
> ------------------------

------------------------

spridgets@autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/mharc@autox.team.net
<Prev in Thread] Current Thread [Next in Thread>