At 08:24 AM 12/3/96 MST, you wrote:
>
>Hi Group,
>Does anyone have a part number or source for a crankshaft pulley that is a
>two groove instead of the stock single that will bolt onto the original
>harmonic balencer? It is the three mounting hole version. I have checked
>most of the junk yards around here and all of the two groove pulleys are for
>the later model engines and have a heavy balencer as part of the pulley. I
>need the thin sheet metal type pulley.
>
>Cullen in Tempe
>
Since the Tiger had bastard pulleys, with strange offsets, your not likely
to find a match to the rest of the stock system. If your looking for stock
Ford pully sets, they should be available in salvage operations specializing
in 60's hardware.
Tom
|