tigers
[Top] [All Lists]

Re: 351W Head Interchangeability and extra water passage holes

To: BMcgu22954@aol.com
Subject: Re: 351W Head Interchangeability and extra water passage holes
From: Tom Hall <modtiger@engravers.com>
Date: Mon, 8 Sep 1997 00:45:53 -0700 (PDT)
At 11:08 PM 9/7/97 -0400, you wrote:
>The special pistons are hard, if not impossible to come by, as I don't think
>they are made any more. (I could be wrong though) Could be custom machined,
>maybe check Hemmings.
>Ramon, ask Dan Walters. He's done that.
>
>Special Pistons, to get proper compression. 
>Special head bolts. (1/2" section, 7/16 thread)
>351 intake manifold gaskets.
>
>I think that's the shopping list.
>
>Bruce McGuire

Don't forget pushrod guide plates and hardened pushrods

Tom Hall


<Prev in Thread] Current Thread [Next in Thread>