tigers
[Top] [All Lists]

Re: Headlight wiring questions

To: marrone@wco.com
Subject: Re: Headlight wiring questions
From: gary_winblad@juno.com (Gary A Winblad)
Date: Mon, 17 Aug 1998 19:50:05 -0700
On Mon, 17 Aug 1998 17:37:14 -0700 Frank Marrone <marrone@wco.com>
writes:

>
>1.  How far forward from the wiring harness clamp centered over the =
>wheel well arch should the junction between the main harness and the =
>head-lamp sub-harness be?
>
Mine are about 3 inches... just where they want to lay with no
stretching.

>2.  Are the head-lamp sub-harness wires supposed to have a sleeve over 
>=
>the wires or do the individual wires show?
>
No sleeve, they show.

>3.  Are both the head-lamp and turn-signal grounds connected at the 
>clip =
>under the hood bump stop?

The turn-signals don't have a ground, that's why you have to jiggle
the screws periodically..  At least on early Mk1s.


>
>I seem to remember that the harness goes behind the voltage regulator 
>=
>bracket on the drivers (US) side, is this correct?

Yes.

Gary


<Prev in Thread] Current Thread [Next in Thread>