Forgot to respond to Ray's message regarding the FORD fan. It is stamped
with the following: CF-09DE-A. Six Aluminum blades riveted to a steel hub.
Will require trimming to fit the rack and depending on your water pump, some
modification to the hub hole.
Allan
B9472373
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of John Crawley
Sent: Wednesday, September 02, 1998 3:19 PM
To: Ray McCrary
Cc: tigers@autox.team.net
Subject: Re: Ford and Volvo fans
Hi Ray:
The Volvo fan O.D. seems to be 14 1/4 when measured with my carpenter's
tape. The center hole is 1 3/16.
The part no is Volvo 683541 IMP 69 34.
The four locating holes line up with the TIGER pump and I have successful
used them for centering the fan but a better
install is to use the Volvo aluminum spacer turned down to 1/4 in thickness
as this will give exact centering.
Godspeed
Jc
|