Group:
Another alternative to the rotisserie is to leave the front and rear
suspensions attached and turn the car on its side with a rocking frame
attached to the wheel hubs with the tires removed. Four lenghts of 1
1/2, 11 ga tubings with an 80 degree bend in them for the car to rock
on. Another piece of tubing connecting the front and rear hubs together
on the other side as a lifting point. I used an engine hoist to then
place the car on its side. The car is stable resting on its side but I
put an extra brace to the wall just in case.
Charlie Nichols
|