Will this make it a "Pine-ger"??
----------
> From: DJoh797014@aol.com
> To: ZUKPJ86@aol.com
> Cc: tigers@autox.team.net
> Subject: Re: Tiger Pinewood Design
> Date: Sunday, February 14, 1999 5:00 PM
>
> I see nothing wrong with making a Tiger out of wood as
> long as you have proper JAL numbers.
>
> Boy's Life lists some people who sell tips on how to
> make your pinewood derby car very fast. Write for the
> info. Basically the tips are
> 1. Position the rear axle as far back and as high
> as possible. This will mean drilling new holes.
> 2. Most important, super polish the axles, making
> sure to remove the ridge on the axle head.
> 3. Sand off the center ridge of the wheels and then
> super polish.
> 4. Adjust the car so that one of the front wheels
> is in the air. Three wheelers are faster than
> four.
>
> Remember this is a father and son project. Let your
> son help a little.
|