Forget the Victoria British source. Everything else sounds ok.
Al J.
Alpdavegre@aol.com wrote:
> Gene,
>
> Welcome to the ranks of the Sunbeam Fanatics! I am in the same boat as you. I
> bought a basketcase Tiger Mk 1 1965. It was the only way to afford it and
> I'll have fun putting it together. I have done my 1937 Packard convert. and a
> few Alpines so I know what I am getting into. I am by no way an expert on
> Tigers but I'll give you my 2c worth.
> Sheet metal: best to get them from Rob Martel in Canada he has stuff listed
> on a website. His e-mail is robmartel@hotmail.com good prices and good fits.
> Some sheet metal from Alpines will work front valances is one but most are
> pretty bent up from curb hits and such.
> Books: Norm Millers "Book of Norman" is a great book if you can find one.
> Last one I saw on e-bay sold for around $300. Mike Taylors book is very good
> to. Both of these books rare!
> Join Clubs: TEAE, CAT, PTC, etc. Great source for parts and help.
> Brightwork: All exterior same for Alpine except the trim strips,scripts and
> badges that are unique to the Tiger.
> Parts Sources: Rick at Sunbeam Specialties, Curt at Classic Sunbeam, and
> Victoria British(gasp!) are some major sources to get catalogs
> from.
> Questions on parts the exhaust manifold on the left is a stock Ford unit the
> right side is unique to Tigers. The bell housing is a stock Ford unit.
> Experts correct me if I am wrong. Air cleaner housings are indeed expensive
> ranging from $200 to $400, sorry for the bad news there.
> I hope I have answered all your questions for now. You are on the best
> information source right now. There are a lot of good people with many good
> ideas and experience and they are very helpful. I thank them for dealing my
> questions and insaineness.
> Dave Green
> 10 Alpines, 1 Tiger(that trys to keep me broke!)
|