Michael McBeth wrote:
> My (tiny) original key was a fairly close fit, but not awkward. The newer key
> blank that I changed to when the original wore out didn't fit until I took a
> grinder to it. The head is now like the original; a tiny triangular shape that
> squeezes into the proper position.
>
> Michael
Michael,
Funny. My original issue ignition key has that triangular shape, but the trunk
key has a square head. Bumper extenders work fine, but I could remove mine even
before installing them. Of course attention must be paid to the driver side
passenger side bracket location (unmarked). You can tell your wrong if the
bumper
ends are not horizontal, and they ‘smile’ or ‘frown’.
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|