Frank, you can use a MGB 3 point seat belt with this hole in the rear
fender well. You must take out the plastic plug, I had to drill mine
out, and then there is the mounting point for the 3 point for the seat belts.
Larry
Frank Marrone wrote:
>
> High on the rear wheel wells there is a large screw type thing inserted from
> the wheel well side of the body on my car. The end of this screw can be
> seen from the passenger compartment side through a cut out in the inner
> sheet metal (the sheet metal is two layers thick here). I've been told that
> this was provided as a mounting for a three point safety harness. Can
> anyone comment on this harness and the applicability of these holes for an
> anchor point in this application?
>
> Frank Marrone
> B9471116
|