tigers
[Top] [All Lists]

RE: Flywheel and Clutch Selection with original 260 engine

To: "'Todd Gifford'" <tgifford@dee-inc.com>, <tigers@autox.team.net>
Subject: RE: Flywheel and Clutch Selection with original 260 engine
From: "Randall Antosiak" <randya@pacbell.net>
Date: Mon, 24 Feb 2003 15:50:01 -0800
For the clutch, go with a Centerforce Gold.  I have one and it's great.

Norm Miller recommends it on his website

http://www.rootes1.com/index.asp

Click on "The Magic", and then go to "Bits & Pieces" Seven for a
description.


-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]On
Behalf Of Todd Gifford
Sent: Monday, February 24, 2003 2:33 PM
To: 'tigers@autox.team.net'
Subject: Flywheel and Clutch Selection with original 260 engine


Looking for feedback and advice on selecting a new Flywheel and Clutch for
my original 260 Tiger engine that is in the process of being rebuilt.  Not
going to be racing.  For good daily performance driving.

Flywheel:
Any specific recommendations based on experience, and state the pros/cons of
the recommended part.  Should I go aluminum, or stay with cast iron?

Clutch:
Same thing, specific recommendations for selection of new clutch to put on
my original 260 motor.  Needs to be:
Livable pedal pressure
Durable
Light
Cost reasonable

Thanks
Todd Gifford

<Prev in Thread] Current Thread [Next in Thread>