tigers
[Top] [All Lists]

FW: Door Screws

To: <tigers@autox.team.net>
Subject: FW: Door Screws
From: "George R. Leibert" <grl19@cox.net>
Date: Sun, 9 Mar 2003 17:57:07 -0500
A reasonable quality Impact driver works well.  When you strike it with
a hammer, it turns the screw slightly in the selected direction while
under the pressure of the blow.  Been using them for years on motorcycle
cases.  Will loosen without damage to the screw head, just be sure you
have it set for the proper direction!

George
B382000283




-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net]
On Behalf Of Carmods@aol.com
Sent: Sunday, March 09, 2003 5:49 PM
To: tigers@autox.team.net
Subject: Door Screws 

Gh,

To loosen the screws, Get a large and strong handled Philips screw
driver
that fits the screws. Put the screw driver in the screw and strike it
hard
with a large hammer a few times. Apply a lot of axial force and torque
and it
should loosen.

                                                       John Logan

<Prev in Thread] Current Thread [Next in Thread>