I bought an adapter from Canton racing products that matches your
description.
It does NOT fit on my car with headers. 1.5 inches is too tall at the rear.
The stock tiger adapter clears the header by about a 1/2 inch.
Erich
----- Original Message -----
From: "DrMayf" <drmayf@teknett.com>
To: <tigers@autox.team.net>
Sent: Wednesday, April 16, 2003 9:09 PM
Subject: Oil Filter Block Adapter..
> Was surfing through the Racer Parts Wholesale catalog and ran across some
> neat remote oil filter block adapters. They are round with the hose
fitting
> threads coming out the side. Appears to have a large fitting that holds it
> to the block via the screw on filter fitting (kinda hard to describe). It
> can be rotated 360 degrees for oil line placement so would be good for
> headers. Looks to be maybe an inch and a half tall. Part Number is
CA-22595.
> They have 4 in stock and they are $49.99. I couldn't find them on their
web
> site but I emailed them and they do have the 4 in stock.
>
> Http://www.racerpartswholesale.com
>
> Hope this helps someone and no, I don't get anything out of it.
>
> mayf
|