tigers
[Top] [All Lists]

Re: Centerforce clutch question

To: Doug Babcock <thebabcocks@earthlink.net>,
Subject: Re: Centerforce clutch question
From: Rob Guerra <tiger351w@attbi.com>
Date: Thu, 01 May 2003 13:08:48 -0700
I have a centerforce clutch, flywheel and throw out in my Tiger  I have had 
no problems with it running with a stock master cylinder either.

DF490030  Dual friction Clutch
N1439  T/O bearing
700220  flywheel





At 04:58 PM 4/30/2003 -0700, Doug Babcock wrote:
>All my internal engine parts are at the machine shop awaiting balance now, 
>but
>I need to supply a pressure plate before they can do the job right.  From
>everything I have heard Centerforce is the way to go.  Looking at the Tigers
>United site archives (the search function is handy by the way), a 1997 e-mail
>suggests the following part numbers
>
>Pressure Plate (Centerforce I) CF360030, disk 280490, T/O bearing N1439
>
>The Centerforce web site supports the same numbers for all 260, 289, and 
>early
>302, but I vaguely recall an e-mail thread a while ago where someone had 
>clutch
>release problems and the advice was something to the effect of "you should 
>have
>asked for a Tiger clutch, not a Mustang".
>
>Your experiences please.  I would rather do it right the first time.  Also,
>your experiences with the pros/cons of Centerforce I versus II?
>
>Thanks
>
>Doug Babcock

<Prev in Thread] Current Thread [Next in Thread>