tigers
[Top] [All Lists]

Re: Cross member

To: shutchin@netjets.com
Subject: Re: Cross member
From: DJoh797014@aol.com
Date: Sat, 5 Jun 2004 18:29:45 EDT
Simple.  The weight of the engine spread the arms of the frame just
enough so the 4th bolt won't go in.  Make sure the other 3 bolts
are loose. Place a 2x4 on the pan and jack the engine just enough 
to take some weight off.  Now you can insert the 4th bolt. Been there
done that.  

Make sure you remove the jack before drive the car.  Make a hellofva
noise if you don't.

Dave Johnson





<Prev in Thread] Current Thread [Next in Thread>