Listers,
I tried a one piece rubber pan gasket on my Aviaid road race pan designed
for the old style seal on my stroker 5.0 motor and the stupid thing leaked
even after trying the silly cone stuff. I tried and tried and finally an old
style pan gasket and some RTV sealed the thing up and no leaks yet after a
couple thousand miles.
My opinion is DO NOT try the one piece seal on the old style pans. It seems
there is not enough material at the rear of the seal and it leaks from
around the oil pan saddle area.
Best Regards,
Tim Ronak
Business Development Manager
Akzo Nobel Coatings
23961 Via El Rocio
Mission Viejo, CA 92691
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
email: timothy.ronak@akzonobel.com
VM: (800) 234-6747 ext. 2257#
This message, including attachments, is confidential and may be privileged.
If you are not an intended recipient, please notify the sender then delete
and destroy the original message and all copies. You should not copy,
forward and/or disclose this message, in whole or in part, without
permission of the sender.
|