RE: Motor mounts

["Frank P. Marrone" <itswonderful@comcast.net>]

I was able to R&R my oil pan with the crossmember in place.  I used two
piece gaskets both times and it has not leaked.  I forgot to check if the
dip stick cleared the stud girdle until after the engine was in the car.

Frank in Cloverdale, CA

>Subject: Re: Motor mounts
>
> And in order to drop the pan,
>I've got to drop the crossmember as well, so it's something I've been
>stalling on, while the oil continues to drip.
>
>Thanks again, Tim for your help!
>Best Regards
>David