Tony, et al,
MASS flow is what counts, and definitely not cavitation, caused by too
high impeller tip speeds.
One of the best after market water pumps is the one made by Edelbrock
for the HiPo Mustang. It will require a removal, reversing, and
re-installing the fan mounting flange on the pump, if you still have the
1" pulley mount. This was simply a standard Ford fan mount, reversed to
bring the fan back, and make a shorter engine length. It is not cheap,
but it is really fine and all aluminum. For an extra arm and leg, you
can get it polished.
___
Steve Laifman
Editor - TigersUnited.com
Tony Someone wrote:
> LIST- I was recently reading the CAT Shop Notes, supplement 2. I ran
> across it while looking for something else and decided to reread it
> since it had been long enough I had forgotten much of the information.
|