Have stock hubs....thanks!
----- Original Message -----
From: "Jim Sencindiver" <jd.sencindiver@gmail.com>
To: "Jim" <jimsnell@qwest.net>
Cc: "Tiger List" <tigers@autox.team.net>
Sent: Wednesday, December 13, 2006 7:36 PM
Subject: Re: Spare Rim
> Jim,
> If you have stock hubs, you want a 4 x 4.25 bolt spacing (4 bolt holes on
> a
> 4.25 inch diameter ring). If you don't have stock hubs, then you will
> need
> to measure diagonally between bolts to determine the bolt spacing. Hope
> this helps.
> Keep on Tigering!
> --
> Jim Sencindiver
|