tigers
[Top] [All Lists]

Re: [Tigers] Pertronix selection

To: <tigers@autox.team.net>
Subject: Re: [Tigers] Pertronix selection
From: "Smit, Theo" <Theo.Smit@dynastream.com>
Date: Tue, 13 Nov 2007 08:26:29 -0700
If it fits without modifications or custom machine work, then it doesn't
belong on a Tiger... Just bolting stuff on is way too easy.
;)

Theo

-----Original Message-----
From: tigers-bounces+theo.smit=dynastream.com@autox.team.net
[mailto:tigers-bounces+theo.smit=dynastream.com@autox.team.net] On
Behalf Of Rense, Mark (GE Indust, ConsInd)
Sent: November 13, 2007 8:19 AM
To: Rollright@aol.com; tigers@autox.team.net
Subject: Re: [Tigers] Pertronix selection

Jim,
<snip>
As a side note, the aftermarket distributors I have tried would not
clear the F4B casting without machine work, which is why I stayed with
the dual-point when I built this 289 a couple years ago. Anyone else
experience this?

Bugz
_______________________________________________

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

<Prev in Thread] Current Thread [Next in Thread>