tigers
[Top] [All Lists]

Re: [Tigers] Oil pressure sender

To: <tigers@autox.team.net>
Subject: Re: [Tigers] Oil pressure sender
From: "Stu Brennan" <stubrennan@comcast.net>
Date: Thu, 26 Jun 2008 15:08:40 -0400
I did this a bunch of years back when I had the tach and speedo out.  I
was replacing the tube, that was still original.  Being vertically
challenged has its advantages, and I was able to get a hand in there to
undo the nuts on the u-bracket and get it out.  I can't remember all the
details, but I think I may have had the steering column cover off, too.
And with the additional clearance with the tach and speedo out, I may
have done it from below.   But it is possible to do it without removing
the dash.

Find a kid with small hands.  

Stu 

-----Original Message-----
From: tigers-bounces+stubrennan=comcast.net@autox.team.net
[mailto:tigers-bounces+stubrennan=comcast.net@autox.team.net] On Behalf
Of CoolVT@aol.com
Sent: Thursday, June 26, 2008 1:33 PM
To: Greg.Koss@TRW.COM; tigers@autox.team.net
Subject: Re: [Tigers] Oil pressure sender

Greg,
To get the gauge out of the dash you have to be able to get to the  2
nuts 
holding the gauge in.  Getting to those 2 nuts is no easier than
getting to the 
flare nut.
M



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.
(http://autos.aol.com/used?ncid=aolaut00050000000007)
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>