Shaun
There are 4 bolts from the oil pan up into the timing cover and
there maybe RTV sealing it.
You also need to pull the dip stick out.
You probably can get the timing cover off without taking the oil pan off but
you need to be careful not to get gasket material and dirt into the oil pan.
Your choice; gaskets are cheap.
Ron Fraser
-----Original Message-----
From: tigers-bounces+rfraser=bluefrog.com@autox.team.net
[mailto:tigers-bounces+rfraser=bluefrog.com@autox.team.net] On Behalf Of
Shaun Laughy
Sent: Thursday, June 26, 2008 8:39 PM
To: tigers@autox.team.net
Subject: [Tigers] Timing Cover
Hi, folks,
I'm not sure yet if I will have to do it, but I have received conflicting
advice about whether or not the oil pan has to be removed in order to take
the timing cover off my 289. Could anyone who is familiar with this please
let me know?
Thanks,
Shaun
You are subscribed as rfraser@bluefrog.com
Tigers@autox.team.net http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.101 / Virus Database: 270.4.1/1521 - Release Date: 6/26/2008
11:20 AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|