4 on 108 is equivalent to 4 on 4 1/4" so far as wheel mounting is
concerned. The one you have to watch for is that older Mazda wheels are
4 on 110 and that is close enough that you can install the wheels on
Tiger or Alpine hubs, but tightening the lug nuts will bend things.
Theo
-----Original Message-----
From: tigers-bounces+theo.smit=dynastream.com@autox.team.net
[mailto:tigers-bounces+theo.smit=dynastream.com@autox.team.net] On
Behalf Of Bob Hokanson
Sent: August 14, 2008 9:07 PM
To: Tigers; CoolVT@aol.com
Subject: Re: [Tigers] Panasports
According to my calculations 4.25 in (Stock Tiger bolt circle dia)
converts to 107.950 mm... pretty close
Bob H
----- Original Message -----
From: <CoolVT@aol.com>
To: <tigers@autox.team.net>
Sent: Thursday, August 14, 2008 7:58 PM
Subject: [Tigers] Panasports
>I just received some Panasports from Dale A. The bolt spacing is
supposed
> to be 4.5" and these are marked 108mm. I may not be the best in
metric
> conversion but I think 4.5" should be around 114.3mm. They slide
over
> the wheels
> studs okay, but are these going to work? The studs won't be perfectly
> centered
> in the holes. I don't want something that is going to vibrate or
> bump...or
> be unsafe.
> Mark L.
>
>
>
> **************Looking for a car that's sporty, fun and fits in your
> budget?
> Read reviews on AOL Autos.
>
(http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aola
ut00030000000007
> )
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as tgrrr@peoplepc.com
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
You are subscribed as theo.smit@dynastream.com
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|