tigers
[Top] [All Lists]

Re: [Tigers] Rear end colors

To: <drmayf@mayfco.com>
Subject: Re: [Tigers] Rear end colors
From: "steve wick" <srwick@hotmail.com>
Date: Sat, 16 Aug 2008 10:23:04 -0700
I've finished bead blasting the rear end and am starting to paint. The only
reason I can see they may have used glyptal is because the casting for the
center section is so rough. Maybe they wanted to seal all the pits and
crevices
so dirt wouldn't accumulate. Plus, why would they have a small hole drilled
in
an axle tube for a breather and not put a fitting on it for a hose to go to a
frame rail or something?

Steve (scratching head over British engineering)

  ----- Original Message -----
  From: drmayf<mailto:drmayf@mayfco.com>
  To: steve wick<mailto:srwick@hotmail.com>
  Cc: 'tigers'<mailto:tigers@autox.team.net>
  Sent: Thursday, August 14, 2008 7:35 PM
  Subject: Re: [Tigers] Rear end colors


  And quite frankly the glyptal I have is
  not the same color as what is supposed to be on the rear end. Plus, I do
  not know why they would put it on the outside as the stuff was made to
  go inside transformers and such because normal paint failed in oil
  filled ones. So I looked at my spare rear end and it is stock and it is
  not the same color. More like a read lead primer.   But whatever...

  mayf
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>