No.the stock shifter has a flat plate on the bottom as I recall..and there
are two bolts that hold it.one in front and one behind. The Hurst bolts on
with two bolts that are spaced vertically on the shaft and fasten crossways
onto the linkage. My Cobra repro handle has a 'T' reverse lockout like the
original but it's just a 'dummy' as there is no internal rod attached to it.
Jim
_____
From: michael king [mailto:michael.s.king@gmail.com]
Sent: October 1, 2008 10:07 PM
To: Jim
Cc: James E. Pickard; tigers@autox.team.net
Subject: Re: [Tigers] Stock looking Hurst shifter
Quick question,
I have a hurst shifter in my Tiger, The stock shifter will not bolt up to
this? The linkage arms are different?
--
Regards
Michael King
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|