tigers
[Top] [All Lists]

[Tigers] Removing the door fixed window frame

To: <tigers@autox.team.net>
Subject: [Tigers] Removing the door fixed window frame
From: "Robin Young" <robin02@mindspring.com>
Date: Wed, 20 May 2009 17:29:40 -0400
The fixed window frame on the driver side  on my Tiger is bent away from the
windshield frame and does not seat against the weather-strip.  I read
somewhere that the frames are the same for both sides but bent opposite so a
slight bow towards the windshield is correct. I suspect that if this is
true, I may be dealing with a passenger side frame installed on the driver
side from a PO.   Has anyone removed the frame without removing the window
or regulator and can confirm this to be possible?  Either way, is there a
step by step instruction for disassembly/reassembly for the window and
regulator?  Robin Young
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>