tigers
[Top] [All Lists]

Re: [Tigers] Ammeters

To: "tigers" <tigers@autox.team.net>
Subject: Re: [Tigers] Ammeters
From: "steve wick" <srwick@hotmail.com>
Date: Fri, 14 Aug 2009 21:51:50 -0700
I want to thank everyone who replied. I had a couple of people recommend MoMa,
and I saw them listed on Sunbeam Specialties site also, so I'll contact them
for a rebuild and SS for a higher amp version.

Steve
  ----- Original Message -----
  From: steve wick<mailto:srwick@hotmail.com>
  To: tigers<mailto:tigers@autox.team.net>
  Sent: Sunday, August 09, 2009 5:33 AM
  Subject: [Tigers] Ammeters


  A previous owner of my car apparently thought it was a good idea to rewire
the
  ammeter directly from the battery stud on the starter solenoid into the
main
  harness, and not use a fuse or circuit breaker. The battery power wire at
the
  back of my alternator came out of the crimp connector (also done by the
p.o.
  when he switched from generator to alternator) and shorted out, causing the
  ammeter to act as a fuse. I need to know if anyone has a company they
  recommend for rebuilding the ammeter, as I like to have all my original
parts
  working, and then I really need to find one meant for alternators with the
  higher amp readings. I have installed a 40 amp circuit breaker in line and
  bypassed the ammeter for now.

  Steve (in N.Id. and can attest to the fact that a '65 Tiger looks really
small
  on the back of a flatbed tow truck)
  _______________________________________________
  Support Team.Net
http://www.team.net/donate.html<http://www.team.net/donate.html>

  You are subscribed as srwick@hotmail.com<mailto:srwick@hotmail.com>

  Tigers@autox.team.net<mailto:Tigers@autox.team.net>
  http://autox.team.net/mailman/listinfo/tigers<http://autox.team.net/mailman
/listinfo/tigers>

  http://www.team.net/archive<http://www.team.net/archive>
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>