Not sure if you can press it further down, but on the Edelbrock pump I got you
can just press it back, I don't have it handy to tell you how far I pushed it
but it was enough to use Dale's pulleys. He uses that pump as well on his car
as Tim Ronak did (he did an article a while back on it).
http://www.bleachburnout.com/blog/2007/09/07/nothing-new/
Scroll way down you
can see some pics
Sandy
----- Original Message ----
From:
"spook01@comcast.net" <spook01@comcast.net>
To: tigers <tigers@autox.team.net>
Sent: Tue, December 1, 2009 8:34:11 AM
Subject: [Tigers] water pumps and hubs
hello all,B
a quick question regarding water pumps on the 302 option.
can
you press a hub further down on the hd aftermarket pumps to use it on the
tiger with a 302?B or do i need to press off the hub on my 260 type pump and
put it on the new pump?
seems like the mustangs used a body to hub
measurement of 5.7".....but the
tigger is different.
i used the old 260 pump
for years, but it really is out of it's depth with a
larger engine what with
the open impellor and all.
thanks,
rayB
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
You are subscribed as sganz@pacbell.net
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|