Seems to me if you went to a driveshaft shop they could fix you up with the
yoke you need to fit a Dana 44.
From: email@example.com [mailto:firstname.lastname@example.org]
On Behalf Of MAURO D'ANGELO
Sent: Wednesday, January 13, 2010 8:43 PM
Subject: [Tigers] Help with installing 3.07:1 rear gears, please!
I am getting ready to install a posi with a 3.07 gear in my Mark 1A Tiger.
I know this might seem like a dumb question to the experts, but I think all
of the new or recent pinions out there now have 26 fine splines and the
original 2.88 pinions had 10 coarse splines. So when I install the 3.07
gear and pinion, I already know that I won't be able to connect my
driveshaft to the new pinion because the splines won't be able to mate up.
I think this can be resolved by changing the companion flange to one that
bolts onto the driveshaft the same as the original, but bolts to a pinion
with 26 splines. There are two problems with that: First, I have no idea
what manufacturer or part number I would need. Second, I don't know who
would be able to sell it to me and how much it will cost! Can anyone help
me with this information, please? Thanks!!!
You are subscribed as email@example.com
Support Team.Net http://www.team.net/donate.html