tigers
[Top] [All Lists]

Re: [Tigers] Opinions Please: LAT-70 Repro Wheels Better than

To: tigers@autox.team.net, Bob Diehl <bob_diehl@earthlink.net>
Subject: Re: [Tigers] Opinions Please: LAT-70 Repro Wheels Better than
From: David T Johnson <djoh797014@yahoo.com>
Date: Sun, 31 Jan 2010 08:35:54 -0800 (PST)
Bob
 
I stand corrected,  That sure looks like LAT-70's to me.  Perhaps
the restorer replaced original race wheels with them.  I was lucky
just to afford, let alone tires.  Ly JAP Magnas were better than
their driver.
 
Dave

--- On Sun, 1/31/10, Bob Diehl <bob_diehl@earthlink.net> wrote:


From: Bob Diehl <bob_diehl@earthlink.net>
Subject: Re: [Tigers] Opinions Please: LAT-70 Repro Wheels Better than
Originals???
To: tigers@autox.team.net
Date: Sunday, January 31, 2010, 1:59 AM


Looks like racing on original LATs to me.
http://sjnm6a.bay.livefilestore.com/y1puuy65XMaBrUPS7rqur5sgIbRSty4oAunslhKuF
ihA636fXQY9BHR1q8ql00ieHJoQkuuZgZJcOVutLAF2XJt9Il4F36m2Wwa/vancouver-autoshow
-mk1A-racer-480.jpg

bob_diehl

At 04:55 PM 1/30/2010, David T Johnson wrote:
>I Think the broken LAT-70's are a lot of scare tactics  I do believe
>it may be an issue for racing, but not for street use.  The big issue
>is the original LAT-70 did not have the Fed required safety bead.
>My LAT-9's have the same problem.  Mounting a tire and getting it
>to seal can be a problem.  But that's why God made inner tubes.
>
>I don't remember anybody racing LAT 70's or LAT-9's.  When I
>raced I used JAP Magnas  other used Mini Lites with tubes
>I believe Spencer used Halibrands.
>
>Why use a 13 inch wheel now.  Tires are difficult to obtain.
>Listers have said what they are using.
You are subscribed as djoh797014@yahoo.com

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>