tigers
[Top] [All Lists]

Re: [Tigers] throw out bearing noise??

To: Carmods@aol.com
Subject: Re: [Tigers] throw out bearing noise??
From: Tony Somebody <achd73@yahoo.com>
Date: Mon, 31 May 2010 16:17:37 -0700 (PDT)
John- the knee has plenty of play but I like the zerk idea, now instead of
grease I need a substance to take up the slack in the knee.Maybe some blue
silicone that will setup but be pliable enough to allow use. A zerk on the TO
bearing is a great idea . I'm told old Ford ones had a zerk and Dave Munroe
has checked and reports that there is room to get a hose or tube and fitting
thru the clutch arm hole to grease the bearing. I'm planning on starting at a
Ford dealership, then the Mustang guys to try to find an old type. I plan on
calling Tom Hall tonight as I'm told he recommends a Centerforce TO bearing
and I know he has a good reason and too there was a part number, so it might
be one that is hydraulic and does away with our slave cylinder. I will know
later.
THANKS for the kneezerk idea. LOL
 
TtT

--- On Mon, 5/31/10, Carmods@aol.com <Carmods@aol.com> wrote:


From: Carmods@aol.com <Carmods@aol.com>
Subject: Re: [Tigers] throw out bearing noise??
To: tigers@autox.team.net
Date: Monday, May 31, 2010, 1:15 PM


To,  TonytheTiger,

To eliminate the noise, you can drill and tap it with a 1/8 pipe tap and 
insert a Zerk fitting. Then give it a few shots of grease.

That's for the knee problem of course.

John Logan
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>