Anyone try one of these - M-7548-A - Ford Racing Throwout Bearings
http://www.jegs.com/i/Ford-Racing/397/M-7548-A/10002/-1?parentProductId=7633
93
Duke
B382002037
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Carmods@aol.com
Sent: Monday, May 31, 2010 1:15 PM
To: tigers@autox.team.net
Subject: Re: [Tigers] throw out bearing noise??
To, TonytheTiger,
To eliminate the noise, you can drill and tap it with a 1/8 pipe tap and
insert a Zerk fitting. Then give it a few shots of grease.
That's for the knee problem of course.
John Logan
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/wsamouce@kc.rr.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|