The original design is flawed, people have strenghtened them with solder on
the backs IIRC.. but the best bet is to get a repro from Rick, they are
meant to be stronger.
Another thing that leads to them breaking is that they are not adjusted
right and require to much prerssure to activate, hence the breakage.
On 7 July 2010 11:25, <CoolVT@aol.com> wrote:
> Has anyone successfully repaired a broken horn ring? Mine separated where
> the spoke joins the hub. I've tried epoxy, but it didn't hold. I thought
> I
> cleaned the metal well. Any other suggestions?
> Mark L
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/michael.s.king@gmail.com
>
>
--
Regards
Michael King
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|