Very good advice. I have the solid state one sold by MOSS Motors (and highly
recommend it) it's working fine as the temp gauge and a voltage check have
confirmed.
I'll be pulling the sender out today and would not be surprised to see that
the float is leaking.
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Clyde McLaughlin
Sent: Thursday, July 22, 2010 4:22 PM
To: tigers@autox.team.net
Subject: [Tigers] fuel guage
Hi Listers, before getting into the tank and sending unit which isn't easy,
I'd be sure to ck/repalce the voltage stabilizer for the guage system,
these
are often a problem and easier and cheaper than a sender unit...rpl'd one in
an XKE for a customer in the shop last week, he had put a guage and two
sending units in himself, the stabilizer was $35.00 from XK'S unlimited,
probably not the same exact one for a Tiger, but SS has them, Clyde
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/mmichels@socal.rr.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|