Sounds like Alpine seats--Series IV vs Series V.
Allan Ballard
MK1A Tiger
Series IV Alpine
On Aug 24, 2010, at 6:22 PM, rande wrote:
> Hi,
>
> Mr Parlanti is correct about the seat cushions. My 1A (#48)seats have the
individual
> rubber straps, while the Mark II is the single diaphram style for each
seat.
>
>
> As for the seat sliders, left and right are different, but the parts
cataloque
> lists them as the same two part numbers for Alpine Series IV and newer, and
> by extension, all Tigers. Check with Mike in Florida, Gary Schotland in New
> Jersey, or maybe Jerry C. in Texas, they usually deal in used Tiger and
Alpine
> parts. Also, if you need substantial parts of seats (like, for instance,
the
> whole darn seat) things like these end up on eBay sometimes.
>
> I'll defer to others who have more seat part swapping knowledge. Looking at
> the cataloque info for the seat cushion, it seems like the Alpine Series IV
> frame supercedes to the later number listed for the Series V. The seat back
> frame(squab frame) is the same number for Series III through Series V and
Tiger,
> left or right.
>
> RB
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/allanballard@att.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|