Don't know if it matters if you are using a 3-Finger pressure plate vs. the
Diaphram type. Also if this was working then something has changed to make it
not work that could be a clue into what might be a problem. Also depending on
the bell housing you might have to use an adjustable stud (Like on some scatter
sheilds) vs the stock style hook (I guess that what you call it) it may need to
be set up.
Sandy
________________________________
From: Brian Glenn <ora_archy@yahoo.com>
To: Tigers@autox.team.net
Sent: Tue, November 16, 2010 12:27:12 PM
Subject: [Tigers] Clutch Bearing for 302
I'm installing a 302 in one of my Tigers. My mechanic tells me that the clutch
bearing is to short. I'm not very familiar with variations in the clutch
assembly and would appreciate some guidance.
Thanks,
Brian
B382000846LRXFE
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|