Hard to say, since my speedo reads 8 percent slow due to 205/55 15 tires.
But At 3000 I would say about 75 mph.
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of CoolVT@aol.com
Sent: Wednesday, December 29, 2010 8:39 AM
To: barncobob@aol.com; tigers@autox.team.net
Subject: Re: [Tigers] 2.88 ring/pinion , speed vs. rpm
If my memory serves me correctly at 3,000 rpm's you should be at about
72MPH.
In a message dated 12/29/2010 10:57:20 A.M. Eastern Standard Time,
barncobob@aol.com writes:
just curious, for those of u having stock rear end and tranny...
at 60mph(96.5 kph) how many rpms are u turning.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/coolvt@aol.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/mmichels@socal.rr.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|